· Tristan Blackwell · Document Types  · 6 min read

How to Write a Target Market Statement (With a Worked Example)

The FCA found most insurance Target Market Statements too vague. Here's what a good one contains, a section-by-section structure and a worked example you can adapt.

How to Write a Target Market Statement (With a Worked Example)
Image by Immo Wegmann

A Target Market Statement tells distributors who a product is for, who it is not for, and how it should be sold. It is one of the most important product governance documents a manufacturer produces, and one the FCA has found is all too often too vague to be of real use.

This guide sets out what the rules require, what makes a good statement, and includes a worked example you can adapt.

What the rules require

Under the FCA’s product governance rules in PROD 4, manufacturers must identify a target market for each insurance product at a sufficiently granular level, and design the product to meet the needs, characteristics and objectives of customers in that market. The Consumer Duty reinforces the same requirement for retail products.

Manufacturers then have to pass the right information on to distributors. In practice, insurers do this through two documents: a Target Market Statement setting out the target customers and distribution strategy, and a Fair Value Assessment Outcome. Distributors, in turn, must have arrangements in place to obtain that information under PROD 4.3.

Scope narrowed in December 2025. Under PS25/21, the PROD 4 exclusions for specialist risks contracts and general insurance distributed to larger commercial customers are subject to PROD 1.4.3-AR: there must be no policyholders or relevant policy stakeholders who are natural persons acting outside their trade, business or profession. Customer size alone does not exclude a product where these consumers are present. Products for consumers and smaller commercial customers generally remain in scope.

Where most statements go wrong

In its 2024 product governance thematic review, TR24/2, the FCA found that Target Market Statements were often too high level and lacked granularity. It found very few products with a statement that fully met its expectations.

The examples it gave are instructive:

  • A motor product described its target market as anyone who owns a car, on the basis that cover is a legal requirement.
  • An income protection product was aimed at anyone in paid employment, across all occupations, with no consideration of customers who might not need it, such as someone close to retirement with savings to draw on.
  • A private medical insurance statement didn’t reflect the product’s key underwriting criteria, even though those criteria were central to who the product would and would not suit.

By contrast, the FCA pointed to a motor statement with specific criteria, such as a defined age range for drivers, and a clear list of customers for whom the product would not provide the intended value.

The lesson is simple: if a distributor can’t use your statement to tell the right customer from the wrong one, it’s not granular enough.

What a good Target Market Statement contains

A clear structure helps distributors find what they need and keeps statements consistent across your product range:

  1. Product overview. The product name, version, manufacturer and a one-paragraph description of the cover.
  2. Who the product is for. The characteristics, needs and objectives of the target customers, using specific, measurable criteria rather than vague descriptions.
  3. Who the product is not for. The customers for whom the product is unsuitable, or who wouldn’t get the intended value from it. This is often referred to as the negative target market.
  4. Key eligibility and underwriting criteria. The criteria that determine who the product suits, such as age limits, property types or pre-existing conditions.
  5. Distribution strategy. The channels the product is designed for, such as direct, broker, price comparison or embedded, whether sales are advised or non-advised, and whether the product can be sold with other products.
  6. Customers in vulnerable circumstances. Features of the product or the sale that could cause harm to customers with characteristics of vulnerability, and what distributors should do about them.
  7. Link to fair value. A link to the current Fair Value Assessment Outcome and any conditions distributors must meet.
  8. Review and contact. The date of the statement, the date of the next review, and who distributors should contact with questions or feedback.

Worked example

The example below is entirely fictional and greatly simplified. Use it to get a sense of the level of detail a real statement needs, not as a ready-made statement for a real product.

Product: Example Insurer Lifetime Pet Cover, version 3.1

Who the product is for: UK residents aged 18 and over who own a dog or cat aged between 8 weeks and 8 years when cover starts. Customers who want ongoing vet fee cover for illnesses and injuries that continue or recur from year to year, and who can afford premiums that are likely to increase as their pet gets older.

Who the product is not for: People who only want cover for accidents. People looking for cover for conditions their pet had before the policy started. Owners of working, breeding or commercially used animals. Customers who want a premium that stays fixed for the whole of the pet’s lifetime.

Key eligibility criteria: Pets must be microchipped and must not have been diagnosed with an excluded condition in the 12 months before cover starts. Annual vet fee limit of £7,500 per condition, renewing each year.

Distribution strategy: Designed for non-advised sale direct, through price comparison websites and through appointed brokers. Not designed to be sold as an add-on to another product.

Customers in vulnerable circumstances: Premiums are likely to go up as the pet gets older. Distributors must make sure customers are fully aware of this at the point of sale and at renewal, particularly customers who may find it difficult to afford future increases.

Fair value: See the current Fair Value Assessment Outcome for this product. Distributors must not add any fees that would take the total price outside the range assessed.

Review: Statement dated 17 November 2026. Next review due May 2027, or earlier if the product, its pricing or its distribution changes.

Notice that every line gives the distributor something it can act on. Age limits, pet types, what the product won’t cover and which channels it’s built for are all specific enough to be useful.

Keep statements in step with the product

A Target Market Statement must agree with the policy wording, the IPID and the Fair Value Assessment Outcome. If the underwriting criteria change and the statement doesn’t, distributors will be working from the wrong picture.

Since PS25/21, manufacturers have had to set their own product review frequency based on the potential for customer harm. Our guide to setting a product review frequency explains how, and every review should include a check of the statement.

How Ultradoc helps

Ultradoc’s Target Market Statement template gives every product the same section structure. Reusable content blocks keep eligibility criteria and product details identical across the statement, the IPID and the Fair Value Assessment Outcome, and AI consistency checking flags any drift. Reviews, owners and deadlines all sit in one place with Ultradoc’s review and governance tools.

This is a general overview, not legal or compliance advice. Check the current FCA Handbook and your own obligations.

Frequently asked questions

Is a Target Market Statement a customer-facing document?

Normally, no. A Target Market Statement is written by the manufacturer for distributors, who need to know who the product is for and how it should be sold. Some insurers publish their statements online for their distributors, but they are not written for end customers.

What is a negative target market?

A negative target market is the group of customers for whom a product is not suitable, or for whom it would not provide the intended value. Being clear about it helps distributors avoid selling the product to the wrong people. The FCA specifically highlighted a dedicated 'not suitable for' section as good practice.

Who writes the Target Market Statement for a co-manufactured product?

Co-manufacturers must have a written agreement that sets out how they will agree the target market and their respective roles in the product approval process. Since PS25/21, they can also choose to appoint a single lead firm to take sole responsibility for the PROD 4 manufacturer obligations, where the conditions are met.

How often should a Target Market Statement be reviewed?

Review it as part of each product review, and whenever the product, its pricing or its distribution changes. Since PS25/21, manufacturers have had to set their own review frequency in line with the potential for customer harm, so higher-risk products may need their statement checked more often.

Write Target Market Statements distributors can act on

See how Ultradoc keeps every Target Market Statement consistent with your policy wording and IPIDs.

Back to our articles

Related Posts

View All Posts »
Ditch the Ugly Word Templates

Ditch the Ugly Word Templates

Word was never built for regulated IPIDs. Here's why purpose-built document generation beats brittle templates every time.

What is an IPID Document?

What is an IPID Document?

Learn what an Insurance Product Information Document (IPID) must include, how UK FCA rules apply after Brexit, and how to generate compliant IPIDs.